| |
| |
 Specifications
Guarantee Specs for Marine Fuel as per ISO 8217:2005(E)
| Characteristic |
Unit |
Limit |
FO 380CST |
FO 180CST |
Test Method Reference |
| (RMG380) |
(RME180) |
| Density at 15 °C |
kg/m3 |
max. |
991.0 |
991.0 |
ISO 3675 or ISO 12185 (see also 7.1) |
| Kinematic viscosity at 50°C |
mm2/s a |
max. |
380.0 |
180.0 |
ISO 3104 |
| Flash Point |
°C |
min. |
60 |
60 |
ISO 2719 (see also 7.2) |
| Pour point (upper)b |
°C |
|
|
|
|
| - winter quaility |
max. |
30 |
30 |
ISO 3016 |
| - summer quality |
max. |
30 |
30 |
ISO 3016 |
| Carbon residue |
% (m/m) |
max. |
18 |
15 |
ISO 10370 |
| Ash |
% (m/m) |
max. |
0.15 |
0.1 |
ISO 6245 |
| Water |
% (m/m) |
max. |
0.50 |
0.50 |
ISO 3733 |
| Sulfur c |
% (m/m) |
max. |
4.50 |
4.50 |
ISO 8754 or ISO 14596 (see also 7.3) |
| Vanadium |
mg/kg |
max. |
300 |
200 |
ISO 14597or IP 501 or IP 470 (see 7.8) |
| Total sediment potential |
% (m/m) |
max. |
0.10 |
0.10 |
ISO 10307-2 (see 7.6) |
| Aluminium plus silicon |
mg/kg |
max. |
80 |
80 |
ISO 10478 or IP 501 or IP 470 (see 7.9) |
| Used lubricating oil (ULO) |
mg/kg |
|
The fuel shall be free of ULO d |
|
| - Zinc |
max. |
15 |
IP 501 or IP 470 (see 7.7) |
| - Phosphorus |
max. |
15 |
IP 501 or IP 470 (see 7.7) |
| - Calcium |
max. |
30 |
IP 501 or IP 470 (see 7.7) |
| a |
Annex C gives a brief viscosity/temperature table, for information purposes only. 1 mm2/s = 1 cSt
|
| b |
Purchasers should ensure that this pour point is suitable for the equipment onboard, especially if the vessel operates in both the northern and southern hemispheres.
|
| c |
A sulfur limit of 1.5% (m/m) will apply in Sox emission control areas designated by the International Maritime Organization, when its relevant protocal comes into force. There may be local variations.
|
| d |
A fuel shall be considered to be free of ULO if one or more of the elements zinc, phosphorus and calcium are below or at the specified limits. All three elements shall exceed the same limits before a fuel shall be deemed to contain ULO.
|
Guarantee Specs for Marine Gasoil as per ISO 8217:2005(E)
| Characteristic |
Unit |
Limit |
MGO
(DMA) |
Test Method Reference |
| Density at 15 °C |
kg/m3 |
max. |
890.0 |
ISO 3675 or ISO 12185 (see also 7.1) |
| Viscosity at 40°C |
mm2/s b |
max. |
1.50 |
ISO 3104 |
| max. |
60 |
ISO 3104 |
| Flash Point |
°C |
min. |
60 |
ISO 2719 (see also 7.2) |
| Pour point (upper)c |
°C |
|
|
|
| - winter quaility |
max. |
-6 |
ISO 3016 |
| - summer quality |
max. |
0 |
ISO 3016 |
| Cloud point |
°C |
max. |
- |
ISO 3015 |
| Sulfur |
% (m/m) |
max. |
1.50 |
ISO 8754 or ISO 14596 (see also 7.3) |
| Cetane index |
- |
min. |
40 |
ISO 4264 |
| Carbon residue on 10% (V/V) distillation bottoms |
% (m/m) |
max. |
0.30 |
ISO 10370 |
| Ash |
% (m/m) |
max. |
0.01 |
ISO 6245 |
| Appearance f |
- |
- |
clear & bright |
see 7.4 & 7.5 |
| Water |
% (v/v) |
max. |
- |
ISO 3733 |
| Vanadium |
mg/kg |
max. |
- |
ISO 14597 or IP 501 or IP 470 (see 7.8) |
| Total sediment, existent |
% (m/m) |
max. |
- |
ISO 10307-1 (see7.5) |
| Aluminium plus silicon |
mg/kg |
max. |
- |
ISO 10478 or IP 501 or IP 470 (see 7.9) |
| Used lubricating oil (ULO) |
mg/kg |
|
|
|
| - Zinc |
max. |
- |
IP 501 or IP 470 (see 7.7) |
| - Phosphorus |
max. |
- |
| - Calcium |
max. |
- |
| b |
1 mm2/s = 1cSt |
| c |
Purchasers should ensure that this pour point is suitable for the equipment onboard, especially if the vessel operates in both the northern and southern hemispheres.
|
| f |
If sample is clear and with no visible sediment or water, the total sediment existent and water tests shall not be required. See 7.4 and 7.5
|
|
|
|
|